Successful oil change... now a question?

From: Buzz Szarek (buzz@toast.net)
Date: Thu Jan 06 2000 - 05:01:31 PST

*This message was transferred with a trial version of CommuniGate(tm) Pro*
Ok, Thanks to all who responded to me directly and on the list
regarding my oil change.

It went off with out a hitch.... well except for the two seals that came
with the wix filters, thanks to Paul for clearing that up.

Anyway, acouple of you mentioned that you had some sort of valve
connected to the drain cocks of the oil filter cans. It is obvious to
me that this would be a major time saver not to mention it would reduce
the cleanup afterwards. If you have any idea what the specs are for the
valves (size and thread pitch) as well as what type of valve you
recommend I'd appreciate it.

Thanks, 

--
-Buzzard

 Don't drive faster than your angels can fly.
     _______
   /__.___.__\        W. J. Buzz Szarek WM1W
  {___\ ~ /___}       Cobra Consulting Group
  |`o-------o'|      97 ESP Pacific Green / Tan
 buzzNOSPAM@toast.net "High speed, Low drag"
         Remove NOSPAM to reply

This archive was generated by hypermail 2b29 : Mon Feb 21 2000 - 18:15:02 PST