*This message was transferred with a trial version of CommuniGate(tm) Pro*
Here is what I do...I use the long (cheap) springs. Can be bought in very
long lengths...or use a "bailing wire"..I put the spring around the line
from end to end...then wrap the entire length with 2" wide electrical
tape..you can use the 3/4.. Looks great when installed on a nice fresh
painted vehicle..1SG PANTANO
----- Original Message -----
From: jonathon <jemery@execpc.com>
To: Military Vehicles List <mil-veh@uller.skylee.com>
Sent: Monday, March 06, 2000 6:26 PM
Subject: Re: [MV] Heat shield for fuel pipes
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
>
> >My old A1 has some ragged heat shield around the fuel pipes where they
pass
> >along the transmission tunnel.
> >
> >Is that stuff still available and, if so, where from?
>
> Several speed shops (high performance type places) have a number of
> different heat shielding products, Speedway is one place that keeps
sending
> me catalogs but there are others. I could put online some of the pages
if
> you like.
>
> je
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@uller.skylee.com>
> To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@uller.skylee.com>
> Send administrative queries to <mil-veh-request@uller.skylee.com>
>
This archive was generated by hypermail 2b29 : Tue Apr 04 2000 - 21:57:07 PDT