FWIW,
I believe that Pep Boys sells these also.
Dave
jonathon wrote:
> Last week I finished the M35's brake job and installed 6 Speed Bleeders. I
> was able to bleed and flush the entire system (all 6 cylinders) in about 1/2
> hour myself. As with all my civy vehicles that have these now, I am very
> impressed. The part number is SB71620. The only difference between this
> bleeder and the original is that the hex is not as long, but I found it to
> work just fine. Just take your little 1/4" drive 7/16 socket and open it up
> 1/2 turn then stick a hose on and start pumping the pedal, slowly of course.
> Also need to watch the fluid level, I ran it dry once and took some time to
> get back to where I was.
>
> Company is called:
>
> Speed Bleeder Products Inc.
> PO Box 306
> Lamont, IL 60439
> (630)739-4620
> (630)739-9626 fax
> www.speedbleeder.com
> speedbleeder@ameritech.net
>
> No affiliation with them, just like to report on good products when I find them.
>
> je
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@skylee.com>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@skylee.com>
> To reach a human, contact <help@skylee.com>
This archive was generated by hypermail 2b29 : Mon Aug 07 2000 - 22:16:04 PDT