Hi Mark
I just did the same thing with a puller that I rented from the local
Autozone. It was a universal set which had adapters that will pull the
HMMWV pulley off.
You could try that idea.
Glenn M1043
----- Original Message -----
From: <mblair1@home.net>
To: Military Vehicles List <mil-veh@skylee.com>
Sent: Saturday, July 29, 2000 17:15
Subject: [MV] HMMWV PS pump pulley removal?
>
> I'm trying to rebuild my 1986 M998 HMMWV's leaking power steering
> pump, but I can't get the pulley off. I tried a 3-claw pulley puller
> with no luck, I fed it some Liquid Wrench, a couple of my ball-peen
> hammers had a brief conversation with it, and it just laughed at my
> home-made puller, made from a couple 4" lengths of 1-1/4"x3/16" steel
> and some grade-8 bolts:
>
> http://www.qsl.net/ke6myk/tmp/mvc-402f.jpg
>
> Any suggestions? Thanks in advance!
>
> --
> Mark J. Blair, KE6MYK <mblair1@home.net>
> PGP 2.6.2 public key available from http://pgp.ai.mit.edu/
> Web page: http://www.qsl.net/ke6myk/
> DO NOT SEND ANY UNSOLICITED COMMERCIAL EMAIL TO THIS SITE
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@skylee.com>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@skylee.com>
> To reach a human, contact <help@skylee.com>
This archive was generated by hypermail 2b29 : Mon Aug 07 2000 - 22:16:07 PDT
