Yep, have the broken screws.
thanks John
rikk
-----Original Message-----
From: John Souza [mailto:John.Souza@ci.fresno.ca.us]
Sent: Monday, October 16, 2000 11:25 AM
To: rkltd@fullnet.net
Subject: Re: [MV] A windshield frame....
You might want to check the screw holes where that hinge screws to. You may
find that some or possibly all the screws have been broken off. Very common
on the 2 ½ and 5 ton windshields. just a poor design. There is a thin
metal strip that is held in the windshield from by the couple of rivets and
you can't get that strip out. Unless you cut a hole in the end of the
frame. Just thought you might want to check.
Later,
John
MVPA #2697
43 GPW
43 CCKW (several)
M3A1 Scout Car
43 MBT
40 VC5 (2)
41 WC21
44 WC51
52 M62 (2)
53 M127
?? M105A1 (3)
?? M135
?? M35
67 M35A2 (2)
69 M52A2
?? M52A1
>>> "Rikk Rogers" <rkltd@fullnet.net> 10/16/00 8:21:26 AM >>>
.....for M35A2
I am missing the passenger side windshield frame, and between the fact that
that's where the inspection sticker is supposed to be and the fact that Lion
( the finer 1/2 of RK Lion) drove the Deuce and loved it, I think it is
probably time to get some glass in the hole.
A frame & hinge is all I need, I can get glass.
Thanks
Rikk Rogers
RK Lion LTD.
(580)762-3157
rkltd@fullnet.net
MVPA -22345-
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2b29 : Wed Nov 01 2000 - 21:37:46 PST