Hi all!
Well, after replacing glow plugs, temp sensor and controller card, on a
rainy 40 degree morning it still is a hard start. Took grinding 10-12
seconds 3 times before it started with a lot of smoke. Only 2 things left
to change is relay and Bendix. Generator light is still glowing as the
heater fan is turned on and keeps glowing until fan is turned off.
Any other ideas?
Stuart J. Ellis
East Coast Sales Manager
Intraco USA
Web Site: www.intraco.com.sg
Phone: 603-437-1392 Fax: 603-437-6046
Notice :- This message (including all attachments) contain privileged &
confidential information and is subject to the disclaimer notice as set out
at http://www.intraco.com.sg/disclaim_official.htm
This archive was generated by hypermail 2b29 : Wed Nov 01 2000 - 21:37:51 PST