Re: [MV] 24 volts at Blazer Relay

From: Julian Burke (julianb@esper.com)
Date: Tue Nov 07 2000 - 05:04:44 PST


> Hi all!
> I have 24 volts at the big nut on top of relay coming from battery side?
Is
> that right or is the resister shot?

Stuart, The big glowbar resistor seldom ever goes bad. Yes, you will have
24 volts there until the relay is in the ON position. Going into another
area, you can always tell that you have an OPEN somewhere because the
voltage shoots up sky high. Until that relay closes and the circuit loads
down, you will have the higher voltage at that point. Julian



This archive was generated by hypermail 2b29 : Sun Dec 03 2000 - 20:29:47 PST