Thanks for the idea and the input Ian, I may have to do that on the MVPA
logos, I would just have some done up but for 3 the cost is prohibitive.
I am going to CC this to MVPA so they know how you feel.
Rikk Rogers - RK Lion LTD.
(580)762-3157 rkltd@swbell.net
http://home.swbell.net/rkltd/
-M35A2- MVPA -22345-
-----Original Message-----
From: Ian Wallace [mailto:iwallace@qwest.net]
Sent: Wednesday, January 17, 2001 9:40 PM
To: Rikk Rogers; Military Vehicles Mailing List
Subject: RE: [MV] MVPA magnet!
I have taken our club logo which was scanned in and then printed out, in
color, to glossy paper. We then had the "patch" laminated. I had a few to
which I put magnetic sheets on the back. They would probably not come off
even at road speed (which for a military vehicle is not much over 45-50
mph). They are around 7" in diameter, and really look nice.
I would be interested in some MVPA magnetic "stick-on" logos. I can use them
on the Ferret, but the Land Rover, Nope (aluminum).
Sign me up!
Ian Wallace, Seattle
> -----Original Message-----
> From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org]On
> Behalf Of Rikk Rogers
> Sent: Wednesday, January 17, 2001 12:05 PM
> To: Military Vehicles Mailing List
> Subject: [MV] MVPA magnet!
>
>
> One!
> Krystel, I need at least 2 and probably 3, 2 for the doors and one for the
> back.
> 12'rs would be better due to better visibility, and better yet with
> "mvpa.org" under the std lettering on the logo to better make the general
> public more aware of who we are and what we do.
>
> I don't want paint, or a decal on the doors of my M35, but a door magnet
> would go very well and I think many members would jump on em, if they were
> sold in pairs as door logos, maybe with a 6"r for the back.
>
> I see no cost on the website for the 6", the 3" is $2.00, so the 6" should
> be around $5, and a set with 2 12"s and a 6" ought to bring $25,
> and general
> public support for the group, if "mvpa.org" is added.
>
> I will CC this to the MV lists to see if anyone feels the same.
>
> Rikk Rogers - RK Lion LTD.
> (580)762-3157 rkltd@swbell.net
> http://home.swbell.net/rkltd/
> -M35A2- MVPA -22345-
>
> -----Original Message-----
> From: Krystel [mailto:Krystel@MVPA.ORG]
> Sent: Tuesday, January 16, 2001 9:37 AM
> To: Rikk Rogers
> Subject: Re: For the supply room....
>
>
> Rikk:
>
> Due to the expense and low demand for such a product at this time, I'm
> afraid that we do not offer an MVPA magnet as large as 12". We will,
> however, be notifying member with the next Supply Line of our new 6"
> magnet. You may wish to consider purchasing one of them.
>
> Thank you for your support and keep 'em rolling!
>
> Krystel
> MVPA, HQ
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2b29 : Mon Feb 05 2001 - 07:13:49 PST