>
>
>Symptoms: I do not get any suction on the input nor pressure on the output
>side when I crank the engine. Tried with both the old and new pumps.
>However, when I remove the pumps (both) and push the pump lever up and
>down, I can feel suction and pressure on the respective I/O ports. It
>feels like the pump lever is preloaded in the up position against the cam
>when I install the pump on the engine.
i would think of adding 2-3 lbs air to the gas tank filler if you can and
bled the air out of all the lines
my dad 30 years a go cut up a car inter tube and used a radiator hose
clamp to hold it over the filler
i don't know if that will work for you butt good luck
This archive was generated by hypermail 2b29 : Tue May 01 2001 - 07:42:39 PDT