Hello all,
I am looking for a windshield frame for my WC-54 Any on have one to part
with?
Adapt and overcome,
Horse
----- Original Message -----
From: "Chris Davis" <cdavis@webworldinc.com>
To: <mil-veh@mil-veh.org>; <MVlist@yahoogroups.com>;
<mil-veh-oc@yahoogroups.com>; <WWIIMV@yahoogroups.com>
Cc: <roadhound@pnv.net>; <ddavis@webworldinc.com>
Sent: Monday, April 16, 2001 12:49 PM
Subject: [WWIIMV] WC53 Restoration Entry #30 & 31
> I made a spot in my "Carryall - Exploded View" garage for the compressor
> and after some fiddling with gun adjustments and regulator settings
> proceeded to paint the 30 or so smaller parts I picked up from Western
> Sandblast Friday afternoon. The compressor had no trouble staying ahead
of
> the gun and I was very happy with it.
>
> For everyone who has cautioned me about over spray, I have a hanging
> plastic paint booth of sorts setup in the garage. Two box fans move air
> through furnace filters, providing me with good airflow and catching the
> 90% of the over spray. I wet down the driveway just ahead of the fans to
> catch what the filters don't, but it's minimal. I'm also wearing a good
> respirator.
>
> Saturday I removed the Peel Away paper and stripper from the truck. It
> took off the gray primer coat, the Navy yellow coat under that, the Navy
> gray coat under that, and left two softened coats of OD green. I worked
> for an hour or so using a right angle grinder with a 3M gray "de-burring"
> wheel on it to take things down to bare metal. Buffed silver metal is
> showing from the tail gate to the middle window, top to bottom on the
> passenger side. I expect to take most of this week to strip the exterior
> of the truck.
>
> Chris Davis
> MVPA# 20000
> Lake Forest, CA
> '53 WC53 Carryall
> '66 M274A2 Mule
>
>
> To unsubscribe from this group, send an email to:
> WWIIMV-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
This archive was generated by hypermail 2b29 : Tue May 01 2001 - 07:42:40 PDT