Re: [MV] Deuce: Cleaning contacts in starter relay. FYI

From: JJ&A (w7ls@blarg.net)
Date: Sun Jul 29 2001 - 14:36:46 PDT


Gad zooks! Of course, you're right. I should have mentioned that. It went
unthought, as it seems obvious to me. Thanks. Jim

DDoyle9570@aol.com wrote:

> In a message dated 7/29/01 2:46:10 PM Central Standard Time, w7ls@blarg.net
> writes:
>
> << Remove the heavy leads and the one small lead. Remove the relay. Open up
> only the bottom, where the heavy bolts are. Scrape the black stuff off and
> polish with fine emery cloth. Reassemble. You can take the top off, but be
> careful. The coil wires are kinda delicate. I found them to be frayed. I cut
> them a little shorter and tinned the leads, then resoldered carefully. >>
>
> FIRST, BEFORE ANY OF THE ABOVE, DISCONNECT NEGATIVE BATTERY CABLE!!!!!



This archive was generated by hypermail 2b29 : Tue Aug 07 2001 - 09:34:14 PDT