The GM military parts catalog 1984-1987 (52D) lists the starter bolts as
follows on Page 2-1 in the 2.000-group
Bolt, thru...........1960908
Bolt, W/Ext, Thru......1975326
If both same, the starter will move and cause problems.
These starters don't use shims.
Stu Ellis
Seatrade International
#603-437-1392
----- Original Message -----
From: <M2116X6@aol.com>
To: <stuellis@mediaone.net>
Sent: Wednesday, December 12, 2001 5:44 PM
Subject: Re: [MV] CUCV starter problems
> Stu,
>
> The parts book for the CUCV lists the mounting bolts as both being the
same.
> The starter nose cone is the same height off of the block at both bolts.
Is
> the engine block drilled different depths on each bolt? I did buy correct
> close tolerance starter bolts and not hardware store bolts.
>
> Jim
This archive was generated by hypermail 2b29 : Sun Jan 06 2002 - 22:26:51 PST