jim gilmore wrote:
> Brian wrote:
> >........... how do you get mushroomed glowplugs out?
>
> Grab them with vice grips and twist/wiggle them back and forth until
> they pull out. It will take some work and time.
>
or buy the snap on glow plug socket and use an air ratchet, will thread right
out of the hole 99 out of 100 times
>
> > and what is the correct glowplug for the 6.2(M1009). i have ACDELCO13J
> > in it now.
>
> Look in your part book, TM -9 2320-289-20P. You do have the manuals for
> this vehicle, yes? If not...get them. (Try Portrayal Press) The correct
> plug is # 5613939, see the ads for parts dealers in Military Vehicles
> Magazine for them.
>
> Your plugs are probably swelling because the resistors (PN # 14076847)
> on the firewall are bad. This allows 24 volts to go to the 12 volt plugs.
> The CUCV uses 12v plugs
6 volt plug with 12 volts fed to it for fast glow.
> and the HUMVEE uses 24 volt ones.
>
> Jim
>
> NOTE NEW ADDRESS----NOTE NEW ADDRESS---NOTE NEW ADDRESS------AS OF
> JANUARY 4, 2001---------
>
> Jim Gilmore
> 13 Broadway 3rd floor
> Jim Thorpe, PA. 18229
>
> 570-325-5216 phone
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
-- JEFF HAIN-MATSON FRONT LINE MILITARY VEHICLES WEB SITE: www.flmv.net WRIGHTSVILLE PA 717-252-4489 VOICE 717-252-4499 FAX flmv@flmv.net E-MAIL MVPA #1833 IMPS #1726 MVT #9362
This archive was generated by hypermail 2b29 : Sun Jan 06 2002 - 22:26:52 PST