From: Royce C Hayes (rc_hayes1@juno.com)
Date: Thu Mar 28 2002 - 11:58:48 PST
I used an insulation blanket faced on both sides with aluminum foil. You
can also purchase aluminum tape to cover the joints. Worked for me!
Royce
=========================================
On Thu, 28 Mar 2002 11:36:37 -0500 "Ed Kirkley" <mojoedd@bellsouth.net>
writes:
> Hi Bruce,
>
> Mine too came without a rubber mat installed. I was lucky and found
> a VERY
> low mileage unit and so far have found no leaks. I drive this unit
> every
> day so the noise level is very important to me and without some kind
> of mat
> or liner the noise level is unacceptable. I think the problem,
> (from what
> I've heard from friends in the military), was that when an op was
> over the
> guys would hose out the floor of the truck and park it. The water
> would
> then of course stand, soak into the insulation mat and of course
> cause rust.
> I don't intend to hose mine out and I hope that it doesn't develop
> leaks!
>
> If anyone knows of a better way to help reduce the sound level
> please let me
> know. I would love to have all options open.
>
> Thanks,
>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Mon Apr 08 2002 - 00:28:32 PDT