RE: [MV] 20MM cases:

From: David C Prall (dcp@dcptech.com)
Date: Fri Mar 29 2002 - 14:51:13 PST


http://www.ows-ammunition.com/ should be able to supply you with the
necessary dies and reloading press.

http://www.serbu.com should be able to supply you with ammo.

David C Prall dcp@dcptech.com http://dcp.dcptech.com

> -----Original Message-----
> From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org]On
> Behalf Of Terry Lane
> Sent: Friday, March 29, 2002 4:17 PM
> To: Military Vehicles Mailing List
> Subject: [MV] 20MM cases:
>
>
> Hello List---I am planning on building a 20mm single shot cannon with
> windage and elevation adjustment, on wheels. I have recently acquired a
> number of 20mm cadmium plated cartridges,150,
> once fired and need to clean them up, some are a little rusty and I need
> to know what will clean them safely with out damaging the cadmium
> plating. I also obtained a linked belt of 50 live rounds and will pull
> one (very carefully) to use as a mold dummy, for lead bullet
> making.----Any suggestions would be appreciated from you cannon guys out
> there.----Regards----Terry lane
>
> P.S.--I wonder if RCBS can supply me with dies?---(just kidding)
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>



This archive was generated by hypermail 2.1.4 : Mon Apr 08 2002 - 00:28:36 PDT