From: Morgans (nmorgan@centurytel.net)
Date: Wed Apr 24 2002 - 10:02:17 PDT
Steam
----- Original Message -----
From: "Dave Cole" <DavidCole@tk7.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Wednesday, April 24, 2002 11:41 AM
Subject: Re: [MV] Welding - air to water
> You guys are way off.
>
> To the original poster - you obviously have welding experience from the
depth of your question.
>
> Follow this procedure to the letter.
>
> 1. Obtain a bucket of fresh water
> 2. Plug in your arc welder.
> 3. Turn it on.
> 4. Turn it up to the maxium setting
> 5. Take the bucket of water and mix the water with air very near the
welder.
> The best way to do this is to throw the water from the bucket into the
welder air vents.
> 6. Observe the air-water welding process
> Sparks and smoke will eminate from the welder if done properly
> 7. Disconnect the welder power at the fuse box - do not attempt to turn
off the welder switch while the welding process continues
> 8. Extinguish any flames still eminating from the welder.
> 8. Observe the welded air-water molecules, you have to be very quick as
most will vanish if you are not quick.
> 9. Do what you want with the finished product.
>
> That's it!
>
> Warning - Often times this procedure can result in welder destruction and
property damage if not carefully performed.
>
> Another better approach to joining water and air may be super glue. But I
will leave that experiement up to others. (;->)
>
> Dave
>
>
>
>
> 4/23/2002 3:56:54 PM, Recovry4x4@aol.com wrote:
>
> ><<does anyone have any information on welding water to air..........>>
> >You need water to air transition rods. Similar to 6011 but you can't
see
> >them!
> >
> >===Mil-Veh is a member-supported mailing list===
> >To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> >To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> >To reach a human, contact <ack@mil-veh.org>
> >
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Tue May 21 2002 - 23:25:41 PDT