From: archie (jeep@mountain.net)
Date: Sat Sep 28 2002 - 18:57:16 PDT
Dave,
Try these links.
http://www.vintagepowerwagons.com/
http://www.dodgepowerwagon.com/wwwboard/index.html
Happy Hunting
archie =) =) =)
72 M35A2 W/W
At 06:07 AM 9/28/02 -0400, you wrote:
>Hi List,
>
>I have a 41 WC 1/2 ton and an unmounted winch, but no diagram for
>locating exactly where the winch attaches. My front bumper is not
>original, made of two pieces of C shaped iron, one on each side. This
>looks pretty much like the pictures I've seen, but I've had no chance
>to check out another vehicle for real. There is a piece of 1 1/2" L
>beam, slightly longer than the space between the bumpers, spanning the
>space, overlapping on top where it is welded to the bumpers. This
>looks like the front member of my winch. My thought is that this L
>beam was welded in there where the winch should go, but before I go
>cutting it out I sure would like to verify everything. I also need
>universals and a shaft from PTO to winch, and cable. If anyone has any
>diagrams, suggestions, parts to sell, etc., I'd appreciate a response.
>
>Thanks, Dave W.
>
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:21:26 PDT