From: GOTAM35 (gotam35@sc.rr.com)
Date: Thu Nov 14 2002 - 19:29:48 PST
----- Original Message -----
From: "Doug Trader" <thomasdtrader@yahoo.com>
> what exactly do I need, I already have the
> PTO going to the front for the winch. I plan to have
> both be operable, whatever it takes. So anyone know
> what it is gonna take to do this? And where to get
> it?
I have a pto operated winch on my M35 and I concluded there was no way to
make it work for a pump because of the reverse on the pto. I don't know if
the M211 is the same way or not, but I bought a 24 volt electric pump for my
dump kit. It works well, but it is slow. If it was something I planned to
use allot I wouldn't be happy. It works great for that occasional load of
scrap metal of mulch for the house. I use it at work but not much. I got
it from Bailey and they have a web site at something like baileynet.com. It
cost a little over $600, but it takes the place of everything. Not pto,
pump or valves, so if you needed all that it is not a bad price. And you
can stand outside the truck and control the dump with the remote. Nothing
quite like mashing the up button and watching it rise.
In the future I would consider a second pto. I may be wrong here but it
looks like one of my parts trucks has a separate pto on the transfer case
for the pumper that was on it. Just a few thoughts.
Joe Trapp
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:37:51 PDT