From: Steve & Jeanne Keith (cckw@attbi.com)
Date: Thu Feb 06 2003 - 16:03:32 PST
----- Original Message -----
From: "Ryan M Gill" <rmgill@mindspring.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Thursday, February 06, 2003 6:48 PM
Subject: Re: [MV] Replica vehicles
If you wanted to do what you stated below, you would need a different
gear carrier/housing. The ring would have to be on the other side of the
pinion...
Steve AKA Dr Deuce
PS: The WW2 GM trucks with GM axles put the front gear carrier in
upside down
>
> Are Dodge Power wagon/M37 Diffs the same front to back? And if you
> flip them over, are there drain holes in the bottom that are also the
> same as the filler hole in the top? Would you have to rebuild the
> differential backwards in the pumpkin to get everything going
> forwards with a rear engined configuration?
> --
> --
> ----------------------------------------------------------------
> - Ryan Montieth Gill '01 Honda Insight -
> - rmgill@SPAmindspring.com '85 CB700S -
> - ryan.gill@SPAMturner.com '76 Chevy Monte Carlo -
> - www.mindspring.com/~rmgill '72 Honda CB750 -
> - '60 Daimler FV701H Mk2/3 -
> - '42 Daimler Scout Car Mk II -
> - I speak not for CNN, nor they for me -
> ----------------------------------------------------------------
> - The director of Home Security encourages you to -
> - turn in your neighbor & spy on your friends. -
> ----------------------------------------------------------------
> - C&R-FFL / Protect your electronic rights! \ EFF-ACLU -
> - SAF & NRA/ Join the EFF! http://www.eff.org/ \ DoD #0780 -
> ----------------------------------------------------------------
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:25:26 PDT