From: micdunn (micdunn@ev1.net)
Date: Sun Apr 06 2003 - 18:54:39 PDT
A couple of people have requested the civvy parts data for the M35 and M105
wheel bearings.
Here goes:
M35A2 inner bearings: Timken 3994-3920-4-192
M35A2 outer bearings: Timken 392-3920-4-192
M105 inners and outers:
GM p/n A127418Z
GM p/n 9412028
Carroll Engineering Inc. p/n WS9030-24-25
Carroll Engineering Inc. p/n WS9030PCS24-25
Federal-Mogul p/n 39500
Federal-Mogul p/n 39590-39520
IMO Delaval p/n 39590-39520
Timken p/n 39590-39520
Vickers Inc. p/n 50-65381-02
Yale Security Inc. p/n 5050D3051
Illinois Tool Works p/n 8-52-239ITEM27
Have fun!
-Sarge
----- Original Message -----
From: "micdunn" <micdunn@ev1.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, April 06, 2003 6:47 PM
Subject: Re: [MV] M105A2 Parts
> Seeing as I own both an M35A2 and an M105A2, I was interested in the
answer
> to the question, which parts are interchangable?
> I just checked T M9-2320-361-34P (M35) against TM 9-2330-213-14&P (M105A2)
> and the answer is........
> Ta da......
> The bearings and cones are NOT the same.
> The M35A2 uses 6 pairs of inners, p/n 10945151, and 6 pairs of outers, p/n
> 10948079.
> The M105A2 uses 4 pairs of identical inners and outers, p/n MS19081-230.
> If there is any interest on the list, I can cross reference them and post
> the civilian manufacturers and part numbers on this list.
> -Sarge
> (No, I wasn't a supply weenie)
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:30:46 PDT