From: IHC53 (IHC53@bellsouth.net)
Date: Wed Apr 16 2003 - 07:40:54 PDT
Im in a little more worse shape. Im trying to get the
antenna mount on. Those damn bolts just spin round
and round.. I even tried a little lock tite between the
stud and the body (not the on the bolt itself). Still no luck.
IHC
----- Original Message -----
From: "Dave Jenkins" <gpw1942@bellatlantic.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Wednesday, April 16, 2003 10:11 AM
Subject: Re: [MV] A low tech M1009 problem.
> I had the same problems with 3 bolts on my M1009. I found using a
screwdriver
> to lightly pry between the antenna mount and the body put enough pressure
on
> the insert to stop it from spinning and allowed me to unscrew the bolts.
> Dj
>
> IHC53 wrote:
>
> > I have a low tech M1009 problem. I cant get some of the bolts that
> > hold the antenna bracket loose. When I try to loosen them, both the
> > bolts and the tapped studs that the bolts screw into both spin together.
> >
> > Any idea on how to get the bolts from the studs?
> >
> > IHC
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> > To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org>
> > To reach a human, contact <ack@mil-veh.org>
>
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:30:50 PDT