From: micdunn (micdunn@ev1.net)
Date: Tue Apr 22 2003 - 08:00:24 PDT
Greg, here is the bolt information.
5305-00-725-4183;
thread length 1 1/4"
head width 3/4"
thread diameter 1/2"
Threads per inch 20
Steel, grade 5, Cadmium and chromate, UNF
5305-00-727-5677;
thread length 1 1/2"
head width 15/16"
thread diameter 5/8"
Threads per inch 18
Steel, grade 5, Cadmium and chromate, UNF
5305-00-725-4111 has been discontinued from the federal supply system.
It has been replaced with 5305-00-726-2552
5305-00-726-2552;
thread length 1 1/2" to 1 5/8"
overall length 2 1/4"
head width 15/16"
Threads per inch 18
Steel, grade 8, Cadmium and chromate, UNF
Hope that helps!
-Sarge
----- Original Message -----
From: <Gandjpappy@aol.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, April 20, 2003 9:49 PM
Subject: [MV] Hardware Part Numbers
> I purchased a winch assembly for my Deuce and wanted to buy the bolts for
it prior to starting the installation. Unfortunately the parts manual does
not give the size of the bolts, just the part numbers and that it is a hex
head cap screw. I checked the LRC part number search web site but it gives
the same information. Can anyone point me to where I can find out what the
civilian equivalent for NSN numbered hardware? Specifically for starters,
5305-00-725-4183, 5305-00-727-5677, and 5305-00-725-4111.
>
> Thanks
> Greg
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:30:53 PDT