Re: [MV] Vapor lock on mutts).

From: HMVWF97@aol.com
Date: Wed May 07 2003 - 13:49:10 PDT

• Next message: Employee@MilVeh.com: "Re: [MV] Parts needed for M35a2"
• Previous message: Muttguru@aol.com: "Re: Vapor lock on mutts)."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

A good dose of wd40 in the rubber fuel line ahead of the carb will provide a
somewhat temporary solution to a sticking needle valve that could be
mistakenly construed as a "vapor lock" situation. I used to bang on the top
of the carb to un-stick the valve, but the wd40 in the line works great,
followed by banging on the carb of course, but not as often !
JW

• Next message: Employee@MilVeh.com: "Re: [MV] Parts needed for M35a2"
• Previous message: Muttguru@aol.com: "Re: Vapor lock on mutts)."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:20:29 PDT