RE: [MV] 1953 M35 Brakes

From: jeremyknopow (jeremyknopow@yahoo.com)
Date: Wed Jul 02 2003 - 21:35:02 PDT

• Next message: Jim Newton: "Installation of Second Set of Troop Seats in M35A2..."
• Previous message: Bruce Beattie: "Re: [MV] 1953 M35 Brakes"
• Maybe in reply to: jeremyknopow: "RE: [MV] 1953 M35 Brakes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Anyone know the kit number, per Jeff's suggestion?

I will check it out tomorrow at Autozone. (sorry, no NAPA here)

Thanks All,
Jeremy
  

-----Original Message-----
From: WWIITrucks@aol.com [mailto:WWIITrucks@aol.com]
Sent: Wednesday, July 02, 2003 9:12 PM
To: jeremyknopow@yahoo.com
Subject: Re: [MV] 1953 M35 Brakes

I think the master cyl. piston is stuck or hanging up.this is what
happens if hyd. brakes set around and not used.open the bleader on the
airpack and pump the master cyl. ,if very little or none ,pull the
master cyl.,remove the internal parts ,hone it check for pitting if good
go to a good parts store like napa and match the parts up,they can find
a kit buy the casting number on the master cyl. someone on the list may
know the napa or wagner master cyl. kit number.
                     jeff

• Next message: Jim Newton: "Installation of Second Set of Troop Seats in M35A2..."
• Previous message: Bruce Beattie: "Re: [MV] 1953 M35 Brakes"
• Maybe in reply to: jeremyknopow: "RE: [MV] 1953 M35 Brakes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:22:44 PDT