From: rertman@ix.netcom.com
Date: Tue Jul 08 2003 - 07:42:11 PDT
Howdy, folks:
I sent an inquiring email (inquiring minds want to know) to
the folks who make the SulfaTak electronic battery zappers.
FYI, here are my questions and their replies.
Happy zapping,
Dick
Battery Enhancement Systems wrote:
>
> Thank you for your inquiry -- below are answers to your
> questions.
> 1. Can (or will) the SulfaTak output pose any damage
> potential to any vehicle electronics, such as onboard
> computers, 2-way radios, etc?
> 1. No damage to onboard computer systems.
> 2. Does the SulfaTak 1000 work off the vehicle alternator
> or does it use 120 VAC 60 Hz power?
> 2. SulfaTak 1000 works off 120 VAC. SulfaTak 500 and 2000
> work off alternator.
> 3. Does your SulfaTak work with batteries that have been
> treated with EDTA?
> 3. Our units will work as long as the electrolyte consists
> of sulphuric acid and water with specific gravity at 1.260.
> 4. Do you make a version of the SulfaTak for vehicles
> with 24 VDC electrical systems?
> 4. No. Not directly, our systems for vehicles are strictly
> for 12 volt batteries. If your system is two 12 volt
> batteries in series, then put a SulfaTak 500 or 2000 on each
> 12 volt battery.
>
> Look forward to your reply.
> king@batterybes.com
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:22:45 PDT