From: Marc Strangfeld (curlyjoe98@yahoo.com)
Date: Thu Jul 24 2003 - 00:44:04 PDT
Jonathon and list
I took a look at the tandem setup a little closer
today and have found nothing wrong with the torque
rods or other components. Put a wrench on various
bolts to check for tightness and they were all good.
So, I'll just accept the noise as normal. Runner'
till the wheels fall off, right?
Thanks,
Marc
--- jonathon <jemery@execpc.com> wrote:
>
> >So, do I have some worn out torque rods? Or is
> this
> >just a charicteristic of these trucks? If the
> torque
> >rods are worn out, I can't see it.
>
> As to the noise, I have the same thing, normally
> when backing or going
> forward and backward at slow speed and with lots of
> steering. I was
> concerned but was told that that's just the way
> these things are. I don't
> see how the toque rods would have any effect on this
> axles shifting thing,
> isn't it more to do with the bracket on the axle
> that the end of the spring
> goes into? I think that's the only thing that keeps
> the axle from moving
> side to side.
>
> good luck,
>
> je
>
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:22:48 PDT