From: David Cole (DavidCole@tk7.net)
Date: Mon Sep 22 2003 - 10:49:57 PDT
I'm pretty sure that the standard is 1/2" ID hose. And there is a special
grade of hose made just for air brakes. I've got about 50 feet of it and I
use it to connect my 1" air wrench to my compressor. It says air brake
hose right on the side of it along with some standard numbers. I would bet
that any decent truck parts store would have reels of the stuff.
Dave
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
On Mon, 22 Sep 2003 09:02:54 -0500, Witold Grzymala-Busse <wbusse@ips-
networking.com> wrote:
> When towing a M-809 series vehicle how large of an air hose should I use
> between the towing vehicle and the towed vehicle? Would 3/8" line be
> enough? Also is there some special grade of air hose for air breaks?
>
> WGB
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
-- Dave
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:24:27 PDT