From: Glenn McCalley (glenn@combatcatering.com)
Date: Tue Sep 30 2003 - 13:22:16 PDT
What size switch did you use? Something like the 200 amp or so that you
find for battery disconnect on boats?
Glenn.
----- Original Message -----
From: "D O" <dohe69@hotmail.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Tuesday, September 30, 2003 2:52 PM
Subject: Re: [MV] M35A2 positive batt. cable
> I am not sure what size it is, but I put a ground disconnect switch on
mine
> to kill power to the entire truck (except the solargizers which are
> hardwired to the batts). I used 00 welding cable and crimped/soldered the
> eyelets on them. Try weldingdepot.com or weldingsupply.com for cable, but
> you would have to put on your own eyelets.
>
>
> >From: AVarvarigo@aol.com
> >To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> >Subject: [MV] M35A2 positive batt. cable
> >Date: Tue, 30 Sep 2003 12:16:39 -0400
> >
> >Hi guys, anyone knows the gauge thickness of the positive battery cable,
> >coming out of the battery terminal itself, and going to the starter etc?
> >I want to get a short jumper of the same thickness in order to put a cut
> >off switch in line with it.
> >In fact I would appreciate any recommendations to places I can get the
> >short cable from.
> >The cable has to have eyelets on both ends and the shorter the better.
> >Thank you, Tony V. (avarvarigo@aol.com)
> >
> >===Mil-Veh is a member-supported mailing list===
> >To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> >To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> >To reach a human, contact <ack@mil-veh.org>
>
> _________________________________________________________________
> Share your photos without swamping your Inbox. Get Hotmail Extra Storage
> today! http://join.msn.com/?PAGE=features/es
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:24:28 PDT