From: Mike Maynard (mike@wesleyscott.com)
Date: Wed Mar 10 2004 - 09:43:37 PST
I can't remember, but is there a PTO spot on the transfer case in the
M35 as well? I have a pto driven dump hoist that I want to use on my
truck, but cant afford to buy the rear output for the tranny. But a
standard PTO like mentioned before I have.
Mike (btw.. I have a winch on the front so I need to keep the front pto)
-----Original Message-----
From: rcakitty@verizon.net [mailto:rcakitty@verizon.net]
Sent: Wednesday, March 10, 2004 12:31 PM
To: Military Vehicles Mailing List
Subject: Re: [MV] M35 6 bolt PTO
In a word - - Yes - - it is the SAE standard 6 bolt opening. Robert
Anderson
>
> From: Grant Stockly <grant@stockly.com>
> Date: 2004/03/07 Sun AM 10:32:00 CST
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Subject: [MV] M35 6 bolt PTO
>
> These are the best pictures of the spicer 3053A I could find. It
looks
> like the PTO output is a standard SAE 6 bolt? Like the kind used on
the
> dana/spicer T18?
>
> http://www.easternsurplus.net/spare3.jpg
>
>
> I'd like to use the winch PTO unit off of an M35 on a scout II buggy
I'm
> building and was hoping you guys could help me out. Can anyone verify
> that the Spicer 3053A uses the standard 6 bolt pto opening that other
1/2
> to 1 ton trucks used?
>
> Thanks,
> Grant
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:29:11 PDT
