From: noel shelley (noel@shelley1722.freeserve.co.uk)
Date: Tue Jul 13 2004 - 09:09:52 PDT
Hi list and Tony ,
First fill the master cylinder reservoir FULL
then have the plug to hand . Unscrew the old switch whilst some one else
SLOWLY depresses the brake pedal , as soon as the old switch is out fluid
should run out QUICKLY screw in plug as fluid runs out and this will with a
little luck save you having to bleed the system and the other problems that
can ensue . IF the brake pedal reaches the floor before you have the plug
done up tight , DO NOT take foot of pedal till plug is tight ! Loosening the
plug a little you may still be able to bleed through the plug !
Good Luck Noel
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:33:52 PDT