From: tom-fastest_m-35 (milveh@carr.org)
Date: Mon Jul 26 2004 - 11:57:29 PDT
there is a very simple way to see if your truck with any of the turbots
is making the proper amount of power. get a 0-15 psi gauge like used for
boost (or fuel pressure on gas motors) attach it to the 1/8 npt port on
the intake. go drive it. 1500 rpm, full throttle should be 5 psi and
2300 rpm full throttle should make 9 psi. you should be able to safely
turn the fuel up to 12 psi at 2300 rpm, but any more i advise a ETG.
lunatic tom
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:33:55 PDT