Re: [MV] Plasitc fuel line for M35

From: mark@ehle.homelinux.org
Date: Wed Aug 04 2004 - 03:14:02 PDT


Thanks, Guys, for the answers to my question. As always, this list is the best!

I am off to the hardware store now.
Later -

Mark

Quoting jonathon <jemery@execpc.com>:

> >I had started my Deuce tonight in anticipation of a nice ride around the
> >countryside. I went into the house to get my wife, and when we came back out
> to
> >the truck, something was dripping; it turned out to be fuel. There are 2 of
> >those plastic fuel hoses that had been rubbing together, and one had formed
> a
> >pinhole leak.
>
> I started mine up the other day to back it out and pull it back in but over
> further to work in the brakes. Noticed I had a nice steam of liquid out and
> back on the drive, looked under and saw fuel dripping all over, opened side
> panel and saw fuel running down all over the turbo. Turns out some animal
> had perferated the plastic return tube from the flame primer.
>
>
> >Where does one get that type of hose and fittings?
>
> Have not taken the fitting off to determine the type/brand, but as far as I
> can see the tubing is just nylon tubing.
>
> good luck,
>
> je
>
>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:34:18 PDT