From: Glenn Shaw (mpmutt@mtaofnj.us)
Date: Sun Aug 08 2004 - 10:07:28 PDT
Hi
The question is what kind of paint is it? If it is mil polyurethane
(CARC) which is likely, then there is nothing that will remove it
without damaging the vinyl. You best bet would be to cover it with
paint matching the vinyl door. Acetone and laquer thinner will not cut
the dried CARC. Regular enamel you may be able to cut using some
thinner but try a hidden spot on the door first to see if it attacks it.
Glenn
-----Original Message-----
From: Darrell Ramsell [mailto:daram@comcast.net]
Sent: Sunday, August 08, 2004 2:16 AM
To: Military Vehicles Mailing List
Subject: [MV] Paint remover for HMMWV soft tops.
Gents
What's the best solvent to use to remove paint on HMMWV soft doors?
Just plain old paint thinnner, acitone and so on?
Thanks
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org> To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:34:19 PDT