From: Jon Shoop (shoop19@brick.net)
Date: Sun Aug 08 2004 - 19:42:56 PDT
drain oil and pack the bearings......sorry!
Jon
----- Original Message -----
From: "Jon Shoop" <shoop19@brick.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, August 08, 2004 9:40 PM
Subject: Re: [MV] Early M548 road wheel idler arms
> My M114 hub covers had been updated.......by adding a 12 lb pop off grease
> cap and a grease fitting.....be sure to drain the oil first.
>
> Jon
>
> ----- Original Message -----
> From: "Douglas B Rupp" <rupp@gnat.com>
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Sent: Sunday, August 08, 2004 5:59 PM
> Subject: Re: [MV] Early M548 road wheel idler arms
>
>
> >
> > > > The early model M548's don't have grease fittings on the road wheel
> > idler
> > > > arms, instead drain and fill plugs. Does anyone know what kind of
oil
> > they
> > > > take? I suspect 30W, same as the road wheel bearings but would like
> > other
> > > > opinions.
> > >
> > > Mate you are wasting your time. They are a bad design and just like
the
> > > oil in the hubs, it doesn't want to stay in there. There is a
> > > mod out to convert them to grease nipples as was done with the hubs.
> >
> > Yes I know that.
> > However until such time as I can find the parts, instructions, and time
to
> > do the modification, it seems unwise not to maintain what I have now.
> >
> >
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> > To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org>
> > To reach a human, contact <ack@mil-veh.org>
> >
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:34:19 PDT