Re: [MV] Timing Light

From: Larry Tighe (larryradio@worldnet.att.net)
Date: Sat Sep 18 2004 - 09:36:50 PDT


One of those kits is on eBay at about $9 right now...no telling how high it
will go.

It is number 2489790841

Lar
----- Original Message -----
From: "Buzz" <buzz@softcom.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Saturday, September 18, 2004 12:33 PM
Subject: Re: [MV] Timing Light

>
>
> Kenney,
> An inductive light will work but you have to make a spark plug cable with
a piece of the shield cut
> out. A Dremel tool works well to cut a section out
> If it's a 12V light, connect the negative lead to ground and the positive
lead to the jumper between
> the batteries.
> You can also buy a military adapter kit that has the unshielded cable as
well as a adapter to screw
> into the large plugged hole on the distributor so that you can connect a
tach/dwell meter to the
> coil. IMO the rest of the kit is pretty much useless.
>
> Buzz
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:35:14 PDT