RE: [MV] CAD models of trucks

From: Mike Maynard (mike@wesleyscott.com)
Date: Thu Jan 13 2005 - 12:45:23 PST

Mark, one of the TM's has really good dimensional information of each
vehicle. I had found them at some point in my research, but have no idea
where they are now. I would assume that you could import them into autocad
from the PDF, and maybe scale them appropriately. BTW, if you find some,
please share the M35A2, M105, and M101 with me?

Thanks,
Mike

-----Original Message-----
From: Mark J. Blair, NF6X [mailto:nf6x@nf6x.net]
Sent: Thursday, January 13, 2005 2:42 PM
To: Military Vehicles Mailing List
Subject: [MV] CAD models of trucks

Hi. Do any of y'all know where I could get dimensionally-accurate CAD
models of any common US military vehicles? Line drawings comparable to
the ones found in TMs (especially overhead views) would be fine; I don't
need any fancy 3D stuff.

I'd like to find models (overhead views in particular, though side and
end views would also be helpful) of any of the trucks and trailers I own
in .DXF format for import into AutoCAD, i.e. M35A2, M109A3, M543A2,
M998, M561, M101A2, M105...

I'm drafting plans for my new barn and house, and I'd like to park my
trucks in the plans to make sure I'm allowing enough room and to get a
better feel for what the end result will be like. I've been limping
along by drawing rectangles representing the sizes of the trucks, but it
would be a lot nicer to park recognizable trucks in my drawings. :-)

Thanks in advance for any leads! 

-- 
Mark J. Blair, NF6X <nf6x@nf6x.net>
Web page: http://www.qsl.net/nf6x/
GnuPG public key available from my web page.

===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>

This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:27 PDT