From: Dan Bever (goin_myway@yahoo.com)
Date: Fri Apr 22 2005 - 09:30:12 PDT
Kenny, I will forward your email reply and the others
to the fellow that bought my M44 as this will be
helpful knowlege in making this tow. thanks Dan
--- Recovry4x4@aol.com wrote:
> Dan, if it were mine, and I've done just that, only
> farther, I would remove
> all 4 rear axle shafts and both front drive flanges.
> Its a few more bolts
> altogether but you don't have to crawl anywhere. You
> can take the front drive
> flanges and use them to block off one rear axle
> where the shafts were. You can fab
> up a simple plate or block of wood to do the other
> axle. If you have access to
> additional drive flanges, use them in the back.
> Doing it this way, not even
> the diff gearsets move. All you need it a 3/4 socket
> and ratchet or 1/2"
> impact. Here's a link to a brave soul (me) doing
> just that.
> http://www.easternsurplus.net/engle.jpg
> Kenny
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to:
> <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:42:55 PDT
