From: Michael Hill (wild800@pacbell.net)
Date: Tue May 24 2005 - 19:08:32 PDT
Mike I sprayed the Arevoe and did mix with xylene at 20%. I also used
kragen paint thinner/remover with good results also. I painted a M105A2
Trailer and it has two seasons and still great. Hope this helps. I
painted at about 72 F
Mike Hill EMT-1B
MVPA 25988
KG6FJI
72-M35A2C
86-M1009
86-M105A2
Green radios
Mike Maynard wrote:
>Ok, we bought some Aervoe paint to do the M1009 with. It was suggested by
>the place we bought it from to mix it with xylene (20%). The place we
>bought the primer from sold us Naptha instead. We used that, but we had
>some strange color mis-match, and some odd striping that almost looked like
>it was some overspray.
>
>My question is, for those of you that have used Aervoe paint before, how do
>you mix it? And what with?
>
>BTW, this is '383' Green....
>
>We plan to do a final coat tomorrow (did the first one Sunday), to stick
>with the 72 hours the paint says to wait if not within the first 12 or so...
>
>I figure at this point its best to see what works for people, so that my
>final coat looks good!
>
>Mike
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 22:42:55 PDT