From: Bjorn Brandstedt (super_deuce@hotmail.com)
Date: Thu May 26 2005 - 02:39:12 PDT
Gillespie doesn't supply all colors. Went to Sherwin-Williams for my Earth
Yellow. They mixed it according to a sample of (fresh) Aervoe Earth Yellow,
but could only do it "semi-gloss". It still looks good a year later. I use
Rustoleum "rusty metal" primer and use a brush for all my painting except
for camo borders, which are sprayed afterwards.
Gillespie will turn yellowish brown when heated like around the tip of the
exhaust pipe (was "sand").
Bjorn
MVPA 19212
Meadows of Dan, Virginia
>From: DICK CUMMINGS <cummingspl@adelphia.net>
>To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>Subject: Re: [MV] Aervoe Paint
>Date: Wed, 25 May 2005 21:42:11 -0400
>
>I will second that, get the Gillespie
>
> Dick
>
>
>
>
>>No one I know has used Aervoe twice.....
>>
>>Steve AKA Dr Deuce
>>
>>
>>
>>----- Original Message ----- From: <shoop19@brick.net>
>>To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>>Sent: Tuesday, May 24, 2005 9:12 PM
>>Subject: Re: [MV] Aervoe Paint
>>
>>
>>>George is right....the stuff is not very durable.
>>>
>>>Jon
>>>uses alot of Gillespie..
>>>
>>>>Mike, take the Aervoe back and get some Gillespie, the Aervoe will fade
>>>>out before summer is over..trust me.
>>>>
>>>>G.R.Baker
>>>>
>>>>________________________________
>>>>
>>>>From: Military Vehicles Mailing List on behalf of Mike Maynard
>>>>Sent: Tue 5/24/2005 8:55 PM
>>>>To: Military Vehicles Mailing List
>>>>Subject: [MV] Aervoe Paint
>>>>
>>>>
>>>>
>>>>Ok, we bought some Aervoe paint to do the M1009 with. It was suggested
>>>>by
>>>>the place we bought it from to mix it with xylene (20%). The place we
>>>>bought the primer from sold us Naptha instead. We used that, but we had
>>>>some strange color mis-match, and some odd striping that almost looked
>>>>like
>>>>it was some overspray.
>>>>
>>>>My question is, for those of you that have used Aervoe paint before, how
>>>>do
>>>>you mix it? And what with?
>>>>
>>>>BTW, this is '383' Green....
>>>>
>>>>We plan to do a final coat tomorrow (did the first one Sunday), to stick
>>>>with the 72 hours the paint says to wait if not within the first 12 or
>>>>so...
>>>>
>>>>I figure at this point its best to see what works for people, so that my
>>>>final coat looks good!
>>>>
>>>>Mike
>>>>
>>>>
>>>>===Mil-Veh is a member-supported mailing list===
>>>>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>>>>To switch to the DIGEST mode, send e-mail to
>>>><mil-veh-digest@mil-veh.org>
>>>>To reach a human, contact <ack@mil-veh.org>
>>>>
>>>>
>>>>[* Internet Mail *]
>>>>
>>>>
>>>>
>>>>
>>>>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>>>>To switch to the DIGEST mode, send e-mail to
>>>><mil-veh-digest@mil-veh.org>
>>>>To reach a human, contact <ack@mil-veh.org>
>>>>
>>>
>>>
>>>
>>>===Mil-Veh is a member-supported mailing list===
>>>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>>>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>>>To reach a human, contact <ack@mil-veh.org>
>>
>>
>>
>>===Mil-Veh is a member-supported mailing list===
>>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>>To reach a human, contact <ack@mil-veh.org>
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 22:42:55 PDT