From: STEVE Hill (statesvillenc@msn.com)
Date: Tue Aug 09 2005 - 13:27:09 PDT
Took the KD 2445 number back up to the NAPA guy and he said hummmmm...oh
yes, we can get that for you by 8:00 tomorrow. It is $8.00 more that Kent's
but quick. Thanks for the offer Kent, and to all for the info.
Steve
>From: <santoken@bright.net>
>To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>Subject: Re: [MV] Hub Nut Socket for M35
>Date: Tue, 9 Aug 2005 11:47:41 -0400
>
>Pricing to all my MV friends for that KD socket #2444 (3" 6-point) is
>$21.60 or #2445 (3" 8-point) is $23.34.
>
>Shipping via USPS is prolly gonna run $5-6.
>
>Let me know,
>
>Kent
>
> >
> > From: "Ron" <rojoha@adelphia.net>
> > Date: Tue Aug 9, 9:59 AM
> > To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> > Subject: Re: [MV] Hub Nut Socket for M35
> >
> > Go to any BIG TRUCK parts store. I paid $18 bucks for mine several years
> > ago, 1/2 drive, cheap looking thing that works. I have been to three
> > different truck stores in MA and NH, all carry the same companies
>sockets on
> > a rack on the wall, around 10 different sizes. Look like soup cans with
>one
> > end shaped into a socket with a strip of metal welded across the
>opposite
> > end with a square hole for the torque wrench, painted silver grey,
>fairly
> > thin wall for their size, made expressly for wheel bearing/axle nuts.
>Went
> > up to about 4 inch size and some of the larger ones were 3/4 drive.
> > You can also use a big pair of channel locks if you use the tighten
>to
> > drag, back off method in the 209 series manuals.
> > Stop thinking car, think MANLY toys.....
> > Here's a link to a company that sells KD Tools spindle nut
>wrenches.
> > Same wrench with their name on it at a higher price, but you at least
>know
> > what it looks like
> > http://www.mytoolstore.com/kd/kdbrak13.html#2444
> >
> > Don't be afraid to use Google. Google is your friend!
> > Ronzo
> >
> > ----- Original Message -----
> > From: "STEVE Hill" <statesvillenc@msn.com>
> > To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> > Sent: 09 August, 2005 09:20
> > Subject: [MV] Hub Nut Socket for M35
> >
> >
> > > List,
> > >
> > > I need a source for the 3" socket (or wrench) for the hub nut on the
>M35.
> > > I can find the six point socket, but not the eight point. My NAPA man
> > > didn't have one and couldn't find one to order. I found one in a set
>at
> > > Northern Tool for $170, but no singles.
> > >
> > > Thanks in advance for any help.
> > >
> > > Steve
> >
> >
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> > To switch to the DIGEST mode, send e-mail to
><mil-veh-digest@mil-veh.org>
> > To reach a human, contact <ack@mil-veh.org>
> >
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 23:25:27 PDT