From: Stu (stuinnh@mvnut.us)
Date: Tue Sep 06 2005 - 10:55:27 PDT
Hi all!
1009's were built I believe in Canada using both metric and sae parts. I
have come across both in my CUCV's.
"Stu"
Southern NH, USA
"Live Free Or Die"
MVPA #14790
1967 M151A1 Jeep 1964 M416 Trailer
1985 M1008 CUCV Pickup
-----Original Message-----
From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On Behalf
Of MV
Sent: Tuesday, September 06, 2005 10:32 AM
To: Military Vehicles Mailing List
Subject: Re: [MV] M1009 rear brake lines
I'm pretty sure that your truck uses all standard SAE (US) brake line
fittings and tubing. In fact I don't know if the American car/truck
companies ever went to metric fittings on the brakes. My 86 GMC 2 1/2
ton is all SAE (US) and uses 1/4 and 3/16 steel lines and fittings.
If you aren't sure. Bring in some of your old fittings to NAPA or
whoever and they will match them up.
FWIW, if you have rusty brake lines, just replace them now as they will
pop at the worst time. (Generally when you are heavy on the brake
pedal!) Also, I have seen brake lines that look fine, but beneath those
metal clips that GM used to hold the lines to the frame, the lines were
pitted with rust. They typically pop through at the clips.
Dave
Ron wrote:
> Follow up question regarding making your own lines or buying fittings to
> use or buying double flaring tools....
> Are the fittings on the M1009 brake lines metric or US something?
> Same with the wheel cylinders?
> Since it was made during that weird metrification period where you
> find both metric and SAE fasteners on GM products and things under the
> truck are pretty rusty, both types of wrenches/sockets seem to fit
> interchangeably as the rust flakes off into your eyes....
> Ron
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 23:27:03 PDT