From: Kelley Terry (kbst@copper.net)
Date: Wed Sep 07 2005 - 13:06:14 PDT
On Wednesday 07 September 2005 12:38 pm, you wrote:
> You need TM 9-2330-202-14&P TRA CARGO: 3/4 TON, 2-WHEEL M101A2 (NSN
> 2330-01-102-4697) M101A3 (2330-01-372-5641) TRAILER, CHASSIS, 3/4 TON,
> 2-WHEEL M116A2 (2330-01-101-8434) M116A2E1 (2330-01-333-9773) TRAILER,
> CHASSIS 2-WHEEL M116A3 (2320-01-359-0080) which can be found at
> https://www.logsa.army.mil/etms/index.cfm
That's the same tech manual # (TM 9-2330-202-14P) that's written on the plate on
the trailer arm. The parts list is posted there also as SNL 6-748. I tried to follow
your link to the manual but it doesn't work. Do you have another URL for the
manual or one for the parts list?
>
> But the M101A1 has nothing in common with the A2 other than the body, frame
> and I believe the springs.
> Where are you located?
Utah
>
> Ronzo
> ----- Original Message -----
> From: "Kelley Terry" <kbst@copper.net>
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Sent: 07 September, 2005 13:59
> Subject: [MV] Upgrade to surge brakes in 1967 3/4 ton trailer (M116A1)
>
>
> >I have an old US Army surplus trailer. I use it for heavy loads a lot.
> >Problem is I use a 66 Ford 1/2 ton 4x4 to pull it. The brakes on that
> >year of ford aren't very strong. I have a surplus store that will sell me
> >the surge unit w/o the slave cylinders in the drums. Does anyone know
> >which wheel cylinders are needed or how to identify the necessary part ie
> >axle or brake backing plate to find/order the right wheel cylinders?
> > TIA
> > --
> > Kelley Terry <kbst@copper.net>
This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 23:27:03 PDT