From: Michael Howell (doctormv@frontiernet.net)
Date: Fri Dec 16 2005 - 10:32:34 PST
It depends on how the resister was bypassed. If it was truly bypassed,
ie jumped over and is still connected to the 24v buss then you
shouldn't use AC 60g plugs. If it is now hooked to the 12v buss like
most people recommend you can use the AC 60g plugs. You can get them
at any parts store. You will have to grind the spades down a little to
fit the wireing harness. I pulled one of the old plugs and used a
bench grinder to get them to match.
Mike
Tishomingo, Mississippi
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:37:09 PDT