From: Chris Brunner (cjbrunner@optonline.net)
Date: Sun Jan 29 2006 - 07:47:02 PST
I pulled the rear tail housing assembly when mine broke, and was unable
to get to the spedo gear. It was behind a set of bearings (roller type,
not the pin type). Almost looks like I may have to split the case to
get to it .... am I missing something?
Chris
Robert Anderson wrote:
> With the rear driveshaft removed, unscrew the four bolts that attach
> the tailhousing to the rear T-case half. Hit the housing from side to
> side with a rubber mallet or equivalent to shear the RTV
> adhesive/sealant and remove the housing - - you are THERE. Replace or
> repair as is necessary. Robert Anderson 1/28
>
>
>> From: Chris Brunner <cjbrunner@optonline.net>
>> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>> Subject: [MV] CUCV Spedometer Sensor
>> Date: Sat, 28 Jan 2006 11:21:34 -0500
>>
>> My spedo died in the truck last week during some other related
>> driveline problems (driveshaft issues). Checking the system the
>> cable is fine, the spedo gear that inserts into the transfer case is
>> fine, but the plastic gear inside the transfer case that the pickup
>> rides on is shot (or gone would be a better word). Has anyone ever
>> replaced the plastic gear that is inside the transfer case, if so is
>> it difficult to do?
>>
>> Chris
>>
>> ===Mil-Veh is a member-supported mailing list===
>> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
>> To reach a human, contact <ackyle@gmail.com>
>> Visit the searchable archives at http://www.mil-veh.org/archives/
>
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today - it's
> FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
> To reach a human, contact <ackyle@gmail.com>
> Visit the searchable archives at http://www.mil-veh.org/archives/
>
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:39:55 PDT