From: Stu (stuinnh@mvnut.us)
Date: Mon Jan 30 2006 - 09:35:28 PST
I've had one on my 1009 for 6 years now. Bought it at local U Haul dealer.
You can also find them at your local trailer place. Pulled 2200 lb camper
with it, no problem.
"Stu"
Southern NH, USA
"Live Free Or Die"
MVPA #14790
1967 M151A1 Jeep 1964 M416 Trailer
1985 M1008 CUCV Pickup
-----Original Message-----
Hello --- check out this "dual purpose hitch" from
(HITCH)
(7-Way Molded Connectors with 8-Ft. Cable, Model# 2014)Fit semi plug ??
http://www.northerntool.com/webapp/wcs/stores/servlet/ProductDisplay?storeId
They have many trailer light adapters.
Hope this helps. CR Cundy
----- Original Message -----
> Thanks, John - that's exactly the info I needed! Now, all I have to figure
> out
===Mil-Veh is a member-supported mailing list===
From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On Behalf
Of Carl & Kathy Cundy
Sent: Monday, January 30, 2006 4:37 PM
To: Military Vehicles Mailing List
Subject: *SPAM* Re: [MV] Trailer electrical hookup
Northern Tool catalog. It comes equipped w/ 2 5/16" ball,
and pintle. They sell different size balls to fit this.
http://www.northerntool.com/webapp/wcs/stores/servlet/ProductDisplay?storeId
=6970&productId=7808&R=7808
=6970&productId=200312018&R=200312018
From: <mark@ehle.homelinux.org>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Monday, January 30, 2006 9:48 AM
Subject: Re: [MV] Trailer electrical hookup
> is how to hook the pintle hitch on the truck to the ball on the tow dolly!
>
> Quoting "Hutterer, John (MPAU)" <john.hutterer@smiths-medical.com>:
>
>>
>>
>> Mark,
>>
>> That should be the right plug to fit into the socket on a tractor. You
>> don't really need the plug on the other end. It should be easy to remove
>> with a screwdriver. That would leave you with a cable with seven bare
>> wires, probably color-coded. The easiest way to handle your towing needs
>> would be to take along a 12 volt test light. Plug you cable into the
>> tractor, ground the test light lead, turn on the tractor lights, and
>> look for a wire on the cable that is hot. Turn off the tractor lights
>> and check the same wire again. It should be dead now. You now have the
>> wire that you need to connect to the tow dolly for running lights. I
>> would guess that the tow dolly has a flat utility trailer plug on it.
>> Buy a mating plug at an auto parts store. The brown wire on this plug is
>> probably the tail/running lights. Connect the wire from your tractor
>> cable that you identified as the running lights to the brown wire on the
>> trailer plug. Do the same test/connect for the left and right turn
>> signals. The tractor may have a separate circuit for the brake lights.
>> You will need to step on the brake pedal and see if any of the unused
>> wires in the cable become live. If so, you will need to set up a
>> separate brake light. Simply clamp a standard boat/utility trailer light
>> onto the rear of the dolly and run a wire from the cable to this light.
>> Of course, you will need to make sure that the trailer is properly
>> grounded to the tractor, and that all of your connections are good. This
>> is a quick way to set up what you need. You can go on from there to
>> become as elaborate as you want.
>>
>> John=0D
>>
>> -----Original Message-----
>> From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On
>> Behalf Of mark@ehle.homelinux.org
>> Sent: Monday, January 30, 2006 9:37 AM
>> To: Military Vehicles Mailing List
>> Subject: [MV] Trailer electrical hookup
>>
>> Folks -
>>
>> This is not MV, so delete if you wish. You are the only truckers I know,
>> however
>> - hence my asking this list.
>>
>> I am going to have to drive home a Ford C8000 semi truck from about 700
>> miles away. I will be driving my Mustang to it pulling a car tow dolly.
>> On the return trip, the truck will be pulling my mustang on the dolly.
>> My dilemma is how to interface the truck trailer electrical hookup with
>> the tow dolly lights.
>>
>> If somebody could point me to a web resource with the pinout of the
>> truck hookup, I would be grateful. Also, is this ebay item:
>>
>>
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=3D4608705563
>>
>> the right part to hook up to the truck electrical jack?
>>
>> Thanks!
>>
>> Mark
>>
>> =3D=3D=3DMil-Veh is a member-supported mailing list=3D=3D=3D To=
>> unsubscribe, send
>> e-mail to <mil-veh-off@mil-veh.org> To reach a human, contact
>> <ackyle@gmail.com> Visit the searchable archives at
>> http://www.mil-veh.org/archives/
>>
>> ______________________________________________________________________
>> This email has been scanned by the MessageLabs Email Security System.
>> For more information please visit http://www.messagelabs.com/email
>> ______________________________________________________________________
>>
>> ******************************************
>> The information contained in, or attached to, this e-mail, may contain=
>> confidential information and is intended solely for the use of the=
>> individual or entity to whom they are addressed and may be subject to=
>> legal privilege. If you have received this e-mail in error you should=
>> notify the sender immediately by reply e-mail, delete the message from=
>> your system and notify your system manager. Please do not copy it for
>> any=
>> purpose, or disclose its contents to any other person. The views or=
>> opinions presented in this e-mail are solely those of the author and do=
>> not necessarily represent those of the company. The recipient should=
>> check this e-mail and any attachments for the presence of viruses. The=
>> company accepts no liability for any damage caused, directly or=
>> indirectly, by any virus transmitted in this email.
>> ******************************************
>>
>> Smiths Medical is a Division of Smiths Group plc. Incorporated in
>> England=
>> No: 362847 Registered Office: 765 Finchley Road London NW11 8DS, UK
>>
>> ===Mil-Veh is a member-supported mailing list===
>> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
>> To reach a human, contact <ackyle@gmail.com>
>> Visit the searchable archives at http://www.mil-veh.org/archives/
>>
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
> To reach a human, contact <ackyle@gmail.com>
> Visit the searchable archives at http://www.mil-veh.org/archives/
>
To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
To reach a human, contact <ackyle@gmail.com>
Visit the searchable archives at http://www.mil-veh.org/archives/
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:39:57 PDT