>
> Any good info out there on coverting an MB to 12v? I'm=20
> familiar with the basic idea, but it would be nice to have a
> written step by step procedure from someone who has done it RIGHT. =20
> Parts list, bracket templete, do's and don'ts, pros and cons would
> be nice.
> Thanks in advance
> Paul Madden
> '43 MB "Lil' Texas"
only thing i have ever did is a old farm tarkter and 2-3 old fork
lifts=20
i used 1975-80 gm type alternaters=20
i sloted the gen. brackets to side them back too mou8nt the alt out
front of the gen bracket and use a pice of pipe and a 3/8's bolt and
nut drilling the gen. mounting holes to fit the 3/8's bolt=20
and picked a alt to match the 1 -2 bealts on the motor i used a
35-60 amp alt. on the fork lifts =20
any thing will work with them=20
i hope this helps get with me if you have any questions
they make one wire ver of that alt you don't need to messarould
with a ins wire to the alt that way=20
that one wire alt only needs one big wire to the batt and that's it=20
>=20
> =20
> =20
>
>=3D=3D=3D
>To unsubscribe from the mil-veh mailing list, send the single word
>UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.