Re: [MV] Changing 151A1 fuel pump for A2

JStinson90@aol.com
Sun, 2 Aug 1998 00:17:59 EDT

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Buzz: "[MV] Free to a good home"
Previous message: RHeine1039@aol.com: "[MV] Trailers for sale"
Maybe in reply to: Stu Ellis: "[MV] Changing 151A1 fuel pump for A2"

Hey, it's not very hard!!!!
You should have two lines from the fuel pump.
One sucks this one comes from the fuel tank runs over to the passanger side
and goes thru the floor board to the fuel pump.
The other line blows (pushes) the fuel from the fuel pump to the carb then
theres an over flow line that comes from the carb thru the drivers floor to
the fuel tank.
Now, you will need to mold the lines so there out of the way.
The power wire that ran your fuel pump can now be re-wired up to the
windshield so that you can have the A2 still windshield. This neans that you
will have to change out the windshield mount to A2 mounts. After all of this
you have now upgrated your M151 to the A2 fuel & windshield upgrade. "GOOD
LUCK" !!!!!!!!!!!

Hope this info helps.
Your "JEEP" nut !!!!!!!
Jeff
MVPA Member # 18907
62 M151
67 M151A1w/M4 pedistal&Cradle,M60(dummy)AN/VRC-47(radio)heater,fording kit
71 M151A2 made of GALVANIZED STEEL(replacement body) w/ROPS,&heater
67 M416 trailer

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: Buzz: "[MV] Free to a good home"
Previous message: RHeine1039@aol.com: "[MV] Trailers for sale"
Maybe in reply to: Stu Ellis: "[MV] Changing 151A1 fuel pump for A2"