[MV] m38a1 suspension

Abwher@aol.com
Fri, 14 Aug 1998 00:19:21 EDT

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Rob Root: "Re: [MV] FORD V8 YEAR IDENTITY"
Previous message: bleffler@vnet.ibm.com: "[MV] M4A3'S & 4'S"
Next in thread: ETIMOTHY1@aol.com: "Re: [MV] m38a1 suspension"

help! my m38a1 is sagging. It is about ! inch lower on the drivers side
than on pax side. I am able to lift the jeep with arm power and it will set
level until some weight is applied then the sag returns. The eye to eye
measurements front and back are within spec when springs are off jeep. Threr
dont seem to be any broken leaves. Likewise no broken shackles. I am inclined
to think I Just have "weak" springs. Any one on list have much lucwith having
springs "re-arched" or would it be more effective to just bite the bullet and
replace the springs and if so would you recommend just replacing the affected
side or replace all the way around?
Thanks ahgain in advance
Tony Stephas

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: Rob Root: "Re: [MV] FORD V8 YEAR IDENTITY"
Previous message: bleffler@vnet.ibm.com: "[MV] M4A3'S & 4'S"
Next in thread: ETIMOTHY1@aol.com: "Re: [MV] m38a1 suspension"