Re: [MV] Re:M715 engine swaps

ETIMOTHY1@aol.com
Mon, 12 Oct 1998 14:52:21 EDT

The Chev 350 will bolt up to the original T-98A transmission on the M715 BUT
you must shorten the input shaft about 1 inch and use an adapter plate between
the bellhousing and tranny. In addition, you must use the proper bellhousing.
Noval in California sells the adaptrers as well as motor mount adapters for
this conversion and they are very high quality.

Erik Timothy
Federal Way, WA

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.