[MV] MBT project for sale

MVTrucker@aol.com
Wed, 14 Oct 1998 08:03:44 EDT

My intention was to build an MBT Bantam 1/4 ton trailer to pull with
my MB, but I'll never get to the project. I purchased an MBT with a
missing bed floor due to rust and several inches of the bottom of the
sides are also gone. The fellow I bought it from had sandblasted the
entire trailer, welded a band around the bottom sides and accumulated
most of the items needed to complete the trailer. It did not come with
wheels. New parts include the hand brake lever, wheel bearings, seals,
races and a data plate. It has a complete landing leg assembly and
lunette eye. New ($100.) wiring harness. Then I came across a civilian
1/4 ton Bantam and bought it. The front section of the bed is rusted
through, but at least it has one! It has one original and one combat
wheel w/ND tire. It's towable. The MBT is disassembled. I hope
somebody can use all this stuff. The whole package: $275.00 (parts
alone cost this much). Extra springs included.
Joe Young mvtrucker@aol.com
Home: http://members.aol.com/MVTrucker/home.index.html

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.